Lijsten Creality Ender 3 Dog

Lijsten Creality Ender 3 Dog. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. More makes view all liked by view all make info 73 views found in animals. Unfortunately half of the dog's face was destroyed, and same situation at the back.

Uitgelicht Makes Of Creality Ender 3 Dog By Makermau5 Thingiverse

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 26/08/2018 · creality ender 3 dog. Unfortunately half of the dog's face was destroyed, and same situation at the back. Also i am not happy with the default configuration provided in cura for the ender 3.

I have started using prusa slicer.

01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. It would be better to provide the stls and teach people how to slice. More makes view all liked by view all make info 73 views found in animals. Unfortunately half of the dog's face was destroyed, and same situation at the back. I have started using prusa slicer. I also did the bed levelling twice as i was a bit too high at first. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Message the mods before posting any sales links/affiliate links.

By alockey aug 26, 2018.. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Please be friendly and helpful. Also i am not happy with the default configuration provided in cura for the ender 3. More makes view all liked by view all make info 73 views found in animals. Please be friendly and helpful.

But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog... 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. I have started using prusa slicer. First print also took 1h09 despite the 2h name on a ender v3 2. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Unfortunately half of the dog's face was destroyed, and same situation at the back. Please be friendly and helpful.. It would be better to provide the stls and teach people how to slice.

Printer was working not too bad after setup but i was underextruding a bit.. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark.. That config is a lot closer to working every time.

Message the mods before posting any sales links/affiliate links. Please be friendly and helpful.

I have started using prusa slicer. Printer was working not too bad after setup but i was underextruding a bit. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark.. Also i am not happy with the default configuration provided in cura for the ender 3.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100... So far printed in pla natural, abs grey and black and sapphire cheetah flex.

Please be friendly and helpful. Please be friendly and helpful. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. It would be better to provide the stls and teach people how to slice. By alockey aug 26, 2018. 26/08/2018 · creality ender 3 dog. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Also i am not happy with the default configuration provided in cura for the ender 3. Printer was working not too bad after setup but i was underextruding a bit... Please be friendly and helpful.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Message the mods before posting any sales links/affiliate links. Unfortunately half of the dog's face was destroyed, and same situation at the back. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Also i am not happy with the default configuration provided in cura for the ender 3. 26/08/2018 · creality ender 3 dog.. I have started using prusa slicer.

Printer was working not too bad after setup but i was underextruding a bit. By alockey aug 26, 2018. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. First print also took 1h09 despite the 2h name on a ender v3 2.

Message the mods before posting any sales links/affiliate links. I have started using prusa slicer. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. It would be better to provide the stls and teach people how to slice. I have started using prusa slicer. Please be friendly and helpful. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printer was working not too bad after setup but i was underextruding a bit. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. By alockey aug 26, 2018. More makes view all liked by view all make info 73 views found in animals. Full rules are in the r/ender3 rules widget in the sidebar above this.. Printer was working not too bad after setup but i was underextruding a bit.

Unfortunately half of the dog's face was destroyed, and same situation at the back. . However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

That config is a lot closer to working every time. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Message the mods before posting any sales links/affiliate links. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Printer was working not too bad after setup but i was underextruding a bit. That config is a lot closer to working every time. It would be better to provide the stls and teach people how to slice. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Full rules are in the r/ender3 rules widget in the sidebar above this. I also did the bed levelling twice as i was a bit too high at first.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.. Also i am not happy with the default configuration provided in cura for the ender 3. Please be friendly and helpful. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. So far printed in pla natural, abs grey and black and sapphire cheetah flex.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Please be friendly and helpful. Message the mods before posting any sales links/affiliate links. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 26/08/2018 · creality ender 3 dog. I have started using prusa slicer. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. It would be better to provide the stls and teach people how to slice.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Also i am not happy with the default configuration provided in cura for the ender 3.

Full rules are in the r/ender3 rules widget in the sidebar above this. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. First print also took 1h09 despite the 2h name on a ender v3 2. Full rules are in the r/ender3 rules widget in the sidebar above this. 26/08/2018 · creality ender 3 dog. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Please be friendly and helpful. That config is a lot closer to working every time. Please be friendly and helpful.

That config is a lot closer to working every time.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Full rules are in the r/ender3 rules widget in the sidebar above this.. Please be friendly and helpful.

I also did the bed levelling twice as i was a bit too high at first. Unfortunately half of the dog's face was destroyed, and same situation at the back. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. That config is a lot closer to working every time. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. By alockey aug 26, 2018.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Full rules are in the r/ender3 rules widget in the sidebar above this... I have started using prusa slicer. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Printer was working not too bad after setup but i was underextruding a bit. Full rules are in the r/ender3 rules widget in the sidebar above this.

By alockey aug 26, 2018... That config is a lot closer to working every time. Please be friendly and helpful... So far printed in pla natural, abs grey and black and sapphire cheetah flex.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Full rules are in the r/ender3 rules widget in the sidebar above this. Also i am not happy with the default configuration provided in cura for the ender 3. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. I also did the bed levelling twice as i was a bit too high at first. Printer was working not too bad after setup but i was underextruding a bit.. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

By alockey aug 26, 2018... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. I also did the bed levelling twice as i was a bit too high at first. By alockey aug 26, 2018.. I have started using prusa slicer.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 26/08/2018 · creality ender 3 dog. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. I also did the bed levelling twice as i was a bit too high at first. It would be better to provide the stls and teach people how to slice. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 26/08/2018 · creality ender 3 dog.

First print also took 1h09 despite the 2h name on a ender v3 2... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. I have started using prusa slicer. Also i am not happy with the default configuration provided in cura for the ender 3.. By alockey aug 26, 2018.

26/08/2018 · creality ender 3 dog. Message the mods before posting any sales links/affiliate links. I also did the bed levelling twice as i was a bit too high at first. 26/08/2018 · creality ender 3 dog. First print also took 1h09 despite the 2h name on a ender v3 2. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

More makes view all liked by view all make info 73 views found in animals.. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. So far printed in pla natural, abs grey and black and sapphire cheetah flex.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Unfortunately half of the dog's face was destroyed, and same situation at the back. Please be friendly and helpful.. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. 26/08/2018 · creality ender 3 dog. I have started using prusa slicer. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Unfortunately half of the dog's face was destroyed, and same situation at the back. It would be better to provide the stls and teach people how to slice... However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. It would be better to provide the stls and teach people how to slice. Please be friendly and helpful. Printer was working not too bad after setup but i was underextruding a bit. Unfortunately half of the dog's face was destroyed, and same situation at the back. More makes view all liked by view all make info 73 views found in animals. So far printed in pla natural, abs grey and black and sapphire cheetah flex.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

I have started using prusa slicer. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. That config is a lot closer to working every time. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. More makes view all liked by view all make info 73 views found in animals. Message the mods before posting any sales links/affiliate links. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. Unfortunately half of the dog's face was destroyed, and same situation at the back.

It would be better to provide the stls and teach people how to slice. That config is a lot closer to working every time.. I have started using prusa slicer.

Also i am not happy with the default configuration provided in cura for the ender 3. Please be friendly and helpful. Unfortunately half of the dog's face was destroyed, and same situation at the back. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Printer was working not too bad after setup but i was underextruding a bit. Message the mods before posting any sales links/affiliate links. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. I have started using prusa slicer.

01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode... I also did the bed levelling twice as i was a bit too high at first. Please be friendly and helpful. Also i am not happy with the default configuration provided in cura for the ender 3.

Please be friendly and helpful. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 26/08/2018 · creality ender 3 dog. I have started using prusa slicer. It would be better to provide the stls and teach people how to slice. Message the mods before posting any sales links/affiliate links. First print also took 1h09 despite the 2h name on a ender v3 2. Please be friendly and helpful. By alockey aug 26, 2018. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Message the mods before posting any sales links/affiliate links.

26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. First print also took 1h09 despite the 2h name on a ender v3 2. That config is a lot closer to working every time. Printer was working not too bad after setup but i was underextruding a bit. I have started using prusa slicer. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident.. 26/08/2018 · creality ender 3 dog.

Please be friendly and helpful. That config is a lot closer to working every time. Please be friendly and helpful. Full rules are in the r/ender3 rules widget in the sidebar above this. So far printed in pla natural, abs grey and black and sapphire cheetah flex. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I have started using prusa slicer... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark... Message the mods before posting any sales links/affiliate links. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 26/08/2018 · creality ender 3 dog. Unfortunately half of the dog's face was destroyed, and same situation at the back.. More makes view all liked by view all make info 73 views found in animals.

More makes view all liked by view all make info 73 views found in animals... Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Full rules are in the r/ender3 rules widget in the sidebar above this. By alockey aug 26, 2018. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

It would be better to provide the stls and teach people how to slice... I also did the bed levelling twice as i was a bit too high at first. Also i am not happy with the default configuration provided in cura for the ender 3. Message the mods before posting any sales links/affiliate links. It would be better to provide the stls and teach people how to slice. 26/08/2018 · creality ender 3 dog. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. Full rules are in the r/ender3 rules widget in the sidebar above this. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. That config is a lot closer to working every time.. It would be better to provide the stls and teach people how to slice.

That config is a lot closer to working every time. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. 26/08/2018 · creality ender 3 dog... 26/08/2018 · creality ender 3 dog.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Please be friendly and helpful. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. I also did the bed levelling twice as i was a bit too high at first. By alockey aug 26, 2018. Also i am not happy with the default configuration provided in cura for the ender 3. First print also took 1h09 despite the 2h name on a ender v3 2. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark.. So far printed in pla natural, abs grey and black and sapphire cheetah flex.

It would be better to provide the stls and teach people how to slice. So far printed in pla natural, abs grey and black and sapphire cheetah flex. First print also took 1h09 despite the 2h name on a ender v3 2. Message the mods before posting any sales links/affiliate links. Also i am not happy with the default configuration provided in cura for the ender 3. Printer was working not too bad after setup but i was underextruding a bit... By alockey aug 26, 2018.

Please be friendly and helpful.. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Also i am not happy with the default configuration provided in cura for the ender 3. Unfortunately half of the dog's face was destroyed, and same situation at the back. It would be better to provide the stls and teach people how to slice. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to... Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident.

More makes view all liked by view all make info 73 views found in animals... So far printed in pla natural, abs grey and black and sapphire cheetah flex. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Also i am not happy with the default configuration provided in cura for the ender 3. Please be friendly and helpful. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. By alockey aug 26, 2018. 26/08/2018 · creality ender 3 dog. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Please be friendly and helpful. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I have started using prusa slicer. Message the mods before posting any sales links/affiliate links.

By alockey aug 26, 2018.. That config is a lot closer to working every time.. Unfortunately half of the dog's face was destroyed, and same situation at the back.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Unfortunately half of the dog's face was destroyed, and same situation at the back. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first... By alockey aug 26, 2018.

Unfortunately half of the dog's face was destroyed, and same situation at the back... More makes view all liked by view all make info 73 views found in animals. That config is a lot closer to working every time.. By alockey aug 26, 2018.

Also i am not happy with the default configuration provided in cura for the ender 3... Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. It would be better to provide the stls and teach people how to slice. I also did the bed levelling twice as i was a bit too high at first. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Also i am not happy with the default configuration provided in cura for the ender 3. Message the mods before posting any sales links/affiliate links. More makes view all liked by view all make info 73 views found in animals. Printer was working not too bad after setup but i was underextruding a bit. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. I have started using prusa slicer. Also i am not happy with the default configuration provided in cura for the ender 3.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work... Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. First print also took 1h09 despite the 2h name on a ender v3 2. Message the mods before posting any sales links/affiliate links. By alockey aug 26, 2018. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 26/08/2018 · creality ender 3 dog. I also did the bed levelling twice as i was a bit too high at first. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. It would be better to provide the stls and teach people how to slice.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model... 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Also i am not happy with the default configuration provided in cura for the ender 3. 26/08/2018 · creality ender 3 dog. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. More makes view all liked by view all make info 73 views found in animals. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Unfortunately half of the dog's face was destroyed, and same situation at the back.. It would be better to provide the stls and teach people how to slice.

But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog.. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. It would be better to provide the stls and teach people how to slice. I also did the bed levelling twice as i was a bit too high at first. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I have started using prusa slicer. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident... It would be better to provide the stls and teach people how to slice.

Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident.. I also did the bed levelling twice as i was a bit too high at first. Also i am not happy with the default configuration provided in cura for the ender 3. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2. Message the mods before posting any sales links/affiliate links. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

Full rules are in the r/ender3 rules widget in the sidebar above this. 26/08/2018 · creality ender 3 dog. More makes view all liked by view all make info 73 views found in animals. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. First print also took 1h09 despite the 2h name on a ender v3 2. I also did the bed levelling twice as i was a bit too high at first. By alockey aug 26, 2018.. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

Also i am not happy with the default configuration provided in cura for the ender 3. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Full rules are in the r/ender3 rules widget in the sidebar above this.

More makes view all liked by view all make info 73 views found in animals. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. I also did the bed levelling twice as i was a bit too high at first. By alockey aug 26, 2018. First print also took 1h09 despite the 2h name on a ender v3 2. I have started using prusa slicer. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 26/08/2018 · creality ender 3 dog. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. It would be better to provide the stls and teach people how to slice. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Also i am not happy with the default configuration provided in cura for the ender 3. By alockey aug 26, 2018. Full rules are in the r/ender3 rules widget in the sidebar above this. I have started using prusa slicer. Also i am not happy with the default configuration provided in cura for the ender 3.

That config is a lot closer to working every time. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode... 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode.

05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. Printer was working not too bad after setup but i was underextruding a bit. By alockey aug 26, 2018. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. I also did the bed levelling twice as i was a bit too high at first. Full rules are in the r/ender3 rules widget in the sidebar above this. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode.. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident.

First print also took 1h09 despite the 2h name on a ender v3 2... Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. That config is a lot closer to working every time. Message the mods before posting any sales links/affiliate links. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. More makes view all liked by view all make info 73 views found in animals. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. It would be better to provide the stls and teach people how to slice.. It would be better to provide the stls and teach people how to slice.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Printer was working not too bad after setup but i was underextruding a bit. I also did the bed levelling twice as i was a bit too high at first. 26/08/2018 · creality ender 3 dog. More makes view all liked by view all make info 73 views found in animals. First print also took 1h09 despite the 2h name on a ender v3 2. That config is a lot closer to working every time... 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

Also i am not happy with the default configuration provided in cura for the ender 3. I have started using prusa slicer. More makes view all liked by view all make info 73 views found in animals. First print also took 1h09 despite the 2h name on a ender v3 2. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 26/08/2018 · creality ender 3 dog. Message the mods before posting any sales links/affiliate links. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. It would be better to provide the stls and teach people how to slice.

So far printed in pla natural, abs grey and black and sapphire cheetah flex.. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. I have started using prusa slicer. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 26/08/2018 · creality ender 3 dog. It would be better to provide the stls and teach people how to slice. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. First print also took 1h09 despite the 2h name on a ender v3 2. Also i am not happy with the default configuration provided in cura for the ender 3. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

Full rules are in the r/ender3 rules widget in the sidebar above this. 26/08/2018 · creality ender 3 dog. That config is a lot closer to working every time. Please be friendly and helpful.. By alockey aug 26, 2018.

Message the mods before posting any sales links/affiliate links.. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. More makes view all liked by view all make info 73 views found in animals. By alockey aug 26, 2018. Message the mods before posting any sales links/affiliate links. Also i am not happy with the default configuration provided in cura for the ender 3. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. First print also took 1h09 despite the 2h name on a ender v3 2. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. I have started using prusa slicer.

Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. Printer was working not too bad after setup but i was underextruding a bit. Please be friendly and helpful. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. First print also took 1h09 despite the 2h name on a ender v3 2. By alockey aug 26, 2018. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. First print also took 1h09 despite the 2h name on a ender v3 2.

So far printed in pla natural, abs grey and black and sapphire cheetah flex. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Also i am not happy with the default configuration provided in cura for the ender 3. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. By alockey aug 26, 2018. Please be friendly and helpful... Unfortunately half of the dog's face was destroyed, and same situation at the back.

Message the mods before posting any sales links/affiliate links. Message the mods before posting any sales links/affiliate links. I also did the bed levelling twice as i was a bit too high at first. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode.. First print also took 1h09 despite the 2h name on a ender v3 2.

More makes view all liked by view all make info 73 views found in animals.. Full rules are in the r/ender3 rules widget in the sidebar above this. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. First print also took 1h09 despite the 2h name on a ender v3 2. 26/08/2018 · creality ender 3 dog. Please be friendly and helpful. By alockey aug 26, 2018. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. I also did the bed levelling twice as i was a bit too high at first.

More makes view all liked by view all make info 73 views found in animals. Also i am not happy with the default configuration provided in cura for the ender 3. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. By alockey aug 26, 2018. Unfortunately half of the dog's face was destroyed, and same situation at the back. More makes view all liked by view all make info 73 views found in animals. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Printer was working not too bad after setup but i was underextruding a bit. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode.. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. Unfortunately half of the dog's face was destroyed, and same situation at the back. Full rules are in the r/ender3 rules widget in the sidebar above this. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. By alockey aug 26, 2018. Printer was working not too bad after setup but i was underextruding a bit... It would be better to provide the stls and teach people how to slice.

Please be friendly and helpful... That config is a lot closer to working every time. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. First print also took 1h09 despite the 2h name on a ender v3 2. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. I have started using prusa slicer. Full rules are in the r/ender3 rules widget in the sidebar above this.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

Also i am not happy with the default configuration provided in cura for the ender 3.. 26/08/2018 · creality ender 3 dog. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. I also did the bed levelling twice as i was a bit too high at first. First print also took 1h09 despite the 2h name on a ender v3 2.. Full rules are in the r/ender3 rules widget in the sidebar above this.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work... By alockey aug 26, 2018. 26/08/2018 · creality ender 3 dog. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. I have started using prusa slicer.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

I also did the bed levelling twice as i was a bit too high at first.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. That config is a lot closer to working every time. So far printed in pla natural, abs grey and black and sapphire cheetah flex.. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model.

Printer was working not too bad after setup but i was underextruding a bit. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. I have started using prusa slicer. 26/08/2018 · creality ender 3 dog. Full rules are in the r/ender3 rules widget in the sidebar above this. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support. That config is a lot closer to working every time. So far printed in pla natural, abs grey and black and sapphire cheetah flex. By alockey aug 26, 2018. Unfortunately half of the dog's face was destroyed, and same situation at the back.. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark.

Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. So far printed in pla natural, abs grey and black and sapphire cheetah flex. That config is a lot closer to working every time. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. 26/08/2018 · creality ender 3 dog. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. I have started using prusa slicer.

Please be friendly and helpful. Message the mods before posting any sales links/affiliate links. Please be friendly and helpful. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. First print also took 1h09 despite the 2h name on a ender v3 2. So far printed in pla natural, abs grey and black and sapphire cheetah flex.. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.

First print also took 1h09 despite the 2h name on a ender v3 2. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. First print also took 1h09 despite the 2h name on a ender v3 2. That config is a lot closer to working every time.. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100.

That config is a lot closer to working every time. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Printer was working not too bad after setup but i was underextruding a bit. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. More makes view all liked by view all make info 73 views found in animals. So far printed in pla natural, abs grey and black and sapphire cheetah flex. That config is a lot closer to working every time.

Printer was working not too bad after setup but i was underextruding a bit. First print also took 1h09 despite the 2h name on a ender v3 2. So far printed in pla natural, abs grey and black and sapphire cheetah flex. It would be better to provide the stls and teach people how to slice. Unfortunately half of the dog's face was destroyed, and same situation at the back. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. More makes view all liked by view all make info 73 views found in animals. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.. Message the mods before posting any sales links/affiliate links.

26/08/2018 · creality ender 3 dog. I also did the bed levelling twice as i was a bit too high at first. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. It would be better to provide the stls and teach people how to slice. 26/08/2018 · creality ender 3 dog. Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. First print also took 1h09 despite the 2h name on a ender v3 2. Unfortunately half of the dog's face was destroyed, and same situation at the back. Printer was working not too bad after setup but i was underextruding a bit.

Message the mods before posting any sales links/affiliate links. Full rules are in the r/ender3 rules widget in the sidebar above this. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. Unfortunately half of the dog's face was destroyed, and same situation at the back.

Also i am not happy with the default configuration provided in cura for the ender 3... Mesured 10cm of extresion was around 7 or 8 % short so i changed the parameter from 93 to 100. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. That config is a lot closer to working every time. 05/08/2021 · hi, i have an ender 3, but after assembling, i tried to load files onto the sd card from the box, obj files it shows up on every computer i plug it in to.. However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work. That config is a lot closer to working every time. Printer was working not too bad after setup but i was underextruding a bit. First print also took 1h09 despite the 2h name on a ender v3 2. Message the mods before posting any sales links/affiliate links. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. Please be friendly and helpful. I have started using prusa slicer. So far printed in pla natural, abs grey and black and sapphire cheetah flex... However, when i'm trying to import the gcode into cura or the creality slicer it doesnt work.

That config is a lot closer to working every time. 11/06/2019 · so i bought a creality ender 3 3d printer and printed the test dog model. 26/02/2019 · this video shows the last few minutes of the ender 3 pro completing it's preloaded dog benchmark.ps the test fillement is not enough for the benchmark. That config is a lot closer to working every time. I have started using prusa slicer. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Unfortunately half of the dog's face was destroyed, and same situation at the back. First print also took 1h09 despite the 2h name on a ender v3 2.. 26/08/2018 · creality ender 3 dog.

That config is a lot closer to working every time. It would be better to provide the stls and teach people how to slice. First print also took 1h09 despite the 2h name on a ender v3 2. Unfortunately half of the dog's face was destroyed, and same situation at the back. Full rules are in the r/ender3 rules widget in the sidebar above this. That config is a lot closer to working every time. 26/08/2018 · creality ender 3 dog. But when i plug the sd card into the printer, nothing shows up except the default files the printer comes with which is the cat and the dog. So far printed in pla natural, abs grey and black and sapphire cheetah flex. Message the mods before posting any sales links/affiliate links.

I have started using prusa slicer. Printer was working not too bad after setup but i was underextruding a bit. Printed perfect, no supports only a raft so the damn paws stuck to the bed, thanks for uploading i deleted my memory card by accident. 26/08/2018 · creality ender 3 dog. Also i am not happy with the default configuration provided in cura for the ender 3. It would be better to provide the stls and teach people how to slice. Full rules are in the r/ender3 rules widget in the sidebar above this. More makes view all liked by view all make info 73 views found in animals.

01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. I also did the bed levelling twice as i was a bit too high at first. 01/06/2021 · the gcode provided dog, pig, and cat are not easily printable and require a lot of tweaking in the gcode. Printer was working not too bad after setup but i was underextruding a bit. More makes view all liked by view all make info 73 views found in animals. Remix of creality ender 3 dog, removed base from the original file in meshmixer and scaled it up in simplify 3d so i could print in different materials and sizes,with out support.. Full rules are in the r/ender3 rules widget in the sidebar above this.